Video Guide How to Operate an Liquid-Based Cytology (LBC) Processor

1.First,place the specimen on the shaker and shake for 10 to 15 minutes.

2.While shaking,insert the membrane tubes into one of the slots of the membrane filter machine,which can hold up to four.

3.Then place the slides in the corresponding positions.

4.We are only processing one for now,but if there are four,all slots can be filled.

5.Then select the corresponding hole number,one,two,three,or four.

6.Turn off the shaker and take out the specimen.

7.Extract 1.5 to 3 ml of the specimen and drop it into the membrane tube.

8.Simply press run,then tap confirm,and wait for completion.

9.Great.Slide preparation is complete.

10.Unscrew the membrane tube counterclockwise. Then remove the slide.At this point,the specimen has been transferred onto the slide.

11.Next,you can proceed with staining the slide.

Get direct factory quotes, detailed specifications, and lead times for our pathology solutions within 24 hours.

Pathology Equipment Decoded| Professional Pathology Solutions